CE Courses

NEW CE Course

Hybrid Ceramic Permanent Restorations

Russell A. Giordano II, DMD, DMSc

This article examines the advantages and drawbacks of machining and 3D printing and presents evidence for 3D printed materials for permanent restorations.

 

1 CEU • Cost: $8 • Expires March 31, 2027

CE Course

Preserving Oral Health

Khrystyna Vyprynyuk, MS, RDH; and Renata Budny, MBA, CDT, MDT, FNGS

Dental hygienists and dental technicians can draw on each other’s knowledge and experiences to assist dental practitioners in generating the best treatment outcomes and preventative measures.

1 CEU • Cost: $8 • Expires February 28, 2027

CE Course

In-House Custom Abutment Manufacturing Options

Tim Torbenson

In-house fabrication of custom implant abutments is a very realistic option for many dental laboratories. However, regulatory compliance has been a significant challenge.

1 CEU • Cost: $8 • Expires December 31, 2026

Webinar - Powered by CDEWorld

Transitioning to Printed Denture Production – A Roundtable Discussion

Brian Fritsch (Moderator); Emily Kaizer Murphy; Sean Siegal; Andre Theberge, RDT, CDT, LVI

This roundtable discussion will explore opportunities and best practices for transitioning denture production from analog to digital.

1 CEU • Cost: $0 • Expires October 31, 2024

Courses

A Review of Intraoral Scanners
Ahmad Al-Hassiny, BDS (Hons)
February 2022 Issue - Expires Tuesday, December 31st, 2024 | SOURCE: Inside Dental Technology
CREDITS: 1
COST: $8.00
PROVIDER: AEGIS Publications, LLC
VIEW COURSE
Anti-Snoring and Sleep Apnea Dental Appliances
Laura Andreescu, CDT
January 2022 Issue - Expires Tuesday, December 31st, 2024 | SOURCE: Inside Dental Technology
CREDITS: 1
COST: $8.00
PROVIDER: AEGIS Publications, LLC
VIEW COURSE
Illuminating FDA Requirements on Ti Bases and Blanks (Regulatory Standards CE)
Tim Torbenson
December 2021 Issue - Expires Tuesday, December 31st, 2024 | SOURCE: Inside Dental Technology
CREDITS: 1
COST: $8.00
PROVIDER: AEGIS Publications, LLC
VIEW COURSE
Framework Design Fundamentals for Maxillary Overdentures
Michael D. Scherer, DMD, MS
October 2021 Issue - Expires Tuesday, December 31st, 2024 | SOURCE: Inside Dental Technology
CREDITS: 1
COST: $8.00
PROVIDER: AEGIS Publications, LLC
VIEW COURSE
Optical Behaviors of Zirconia-Based Restorations Over Teeth and Implants in the Esthetic Zone
Caroline F. Rafael, DDS, MSc, PhD; Rodrigo M. Ferreira, DDS, MSc Student; Bernardo B. Passoni, DDS, MSc, PhD; Edwin Ruales-Carrera, DDS, MSc, PhD Student; Cesar A. Benfatti, DDS, MSc, PhD; Anja Liebermann, DDS, MSc, PhD; and Claudia A. Volpato, DDS, MSc, PhD
September 2021 Issue - Expires Tuesday, December 31st, 2024 | SOURCE: Inside Dental Technology
CREDITS: 1
COST: $8.00
PROVIDER: AEGIS Publications, LLC
VIEW COURSE
3D Extraoral Facial Scanning for Facially Generated Treatment Planning and Design
Jeff Bynum, DDS; and Fernando Polanco
July 1, 2021 Issue - Expires Saturday, December 31st, 2022 | SOURCE: Inside Dental Technology
CREDITS: 0
COST: $0
PROVIDER: AEGIS Publications, LLC
VIEW COURSE
FDA Regulations Involving Orthodontic Aligners (Regulatory Standards CE)
Tim Torbenson
June 2021 Issue - Expires Sunday, June 30th, 2024 | SOURCE: Inside Dental Technology
CREDITS: 1
COST: $8.00
PROVIDER: AEGIS Publications, LLC
VIEW COURSE
When to Use Laboratory vs Chairside Processing of Overdentures
Michael D. Scherer, DMD, MS
May 2021 Issue - Expires Tuesday, December 31st, 2024 | SOURCE: Inside Dental Technology
CREDITS: 1
COST: $8.00
PROVIDER: AEGIS Publications, LLC
VIEW COURSE
Classification and Selection Criteria for Dental Ceramics
Siamak Najafi-Abrandabadi, DDS; Asim Abdul Quader, BDS; and Yasmin Raslan Ojjeh, BDS
April 2021 Issue - Expires Tuesday, December 31st, 2024 | SOURCE: Inside Dental Technology
CREDITS: 1
COST: $8.00
PROVIDER: AEGIS Publications, LLC
VIEW COURSE
Management of the Edentulous Patient
Joseph Carpentieri, DDS; and Gary Greenstein, DDS, MS
March 2021 Issue - Expires Tuesday, December 31st, 2024 | SOURCE: Inside Dental Technology
CREDITS: 1
COST: $8.00
PROVIDER: AEGIS Publications, LLC
VIEW COURSE
Showcase A Zone 20 Image
Showcase B Zone 21 Image
Featured Video Zone 30 Image
Promo A Zone 40 Image

Bonding Through Collaboration

For all the knowledge, skill, and refined workflows that dental laboratories put into fabricating exceptionally esthetic, functional restorations with modern restorative materials, technicians have very little control over the critical step of placing the restoration in the patient's mouth.

New Case, Old Patient

Let's get real, straight to the point: What do you do when you are asked to do a remake from 7 years ago? As dental technicians, we hate remakes. Perhaps the only thing worse is a remake of a remake.

The Capabilities of Multilayer Zirconia

A Q&A with Jack Marrano, CDT, MICOI, Director of Signature Prosthetics at Absolute Dental Services in Durham, North Carolina.

Smaller Particles, Big Potential

A Q&A with Julian Conejo, DDS, MSc, assistant professor of clinical restorative dentistry and director of chairside digital dentistry for the Division of Restorative Dentistry at the University of Pennsylvania School of Dental Medicine.